Secret Fix-H
Undercut Anchor System SF horizontal rail system and SF2 hanger clasps to support medium to heavy weight facades.
System accessories, and designed profiles allow secure mounting of medium to heavy weight facades including stone up to 50mm thickness.
Secret Fix-H is designed for invisible mounting of thin and smooth façade materials through undercut anchors.
The undercut anchors, SF2 Clasps, and designed SF profile allows secure mounting of heavier weight façade panels up to 50mm natural stone. Secret Fix-H System uses fixing anchors to guarantee the connections between the façade material and the main profiles of the system.
Main advantages:
- SF2 clasps designed to 'help' the connection to the SF horizontal profile.
- Perfect vision of the façade with no visible holding elements; large variety of sizes and designs of the façade materials
- Highest level of security when fixing the tiles, due to the undercut anchors
- Possibility to use façade materials with thickness ranging from upto 50mm
- Fast and easy installation compared to other secret fix systems
- Secure and fully engineered work, which covers the entire project, and guarantees a complete system solution Cladding Materials
- Use stand off fixings with natural stone panels to remove thickness tolerances
Typical Façade Panel Types:
- Technical Stone, Ceramic Tiles, Glass, Fibre Cement, Natural Stone up to 50mm in thickness, Glass Fiber Reinforced Concrete GFRC, Light Transmitting Concrete
The majority of facades can be designed using 2mm vertical sections, although there structurally required 3mm sections are specified.
Designed for all market leading undercut fixing configurations. SF2 hanger are available with a variety of hole geometry to suit various methods for secret fixing to different facade types, including Fischer FZP, Keil, SFS and other projecting bolts.
The SF2 clasps supplied in 40, 50 & 80mm widths based on loading requirements.
RJ Facades technical department will specify the hanger brackets depending on the façade panel size and weight,
Bracket and profile configuration is specified by RJ Facades technical department. To submit your project specifics please go to Facade Designer.
- Downloads
-
- Approvals
-
UL Winmark Approval (UKAS Product Certification)
The UL Certification covers the full range of brackets and accessory components. The aluminium and stainless EVT brackets and components are manufactured and fabricated in Europe and the UK at UL audited manufacturing sites.
The Approval Covers
A detailed overview of the certified products
Technical specification of the products
An initial assessment of the certified company's factory production control systems.
Design considerations
A review of the products documentation to help demonstrate compliance with the applicable requirements of the UL Scheme.
An assessment of the certified products contribution to any key requirement of the building regulations.
An overview of the certified companies product installation requirements and procedures.
An overview of all supporting test documentation used for the product evaluation.
Ongoing surveillance of the certified company's factory production control system and procedures.
The conditions under which this product certification is valid.
- Technical Characteristics
-
Typical bracket configuration uses the Fixed Point bracket at the highest position on the vertical rail to support the façade vertical dead loads. The Sliding Point bracket is used typically on all other positions on the vertical rail to absorb the project wind loading
The system benefits from using a standard helping hand system, which is interchangeable with other RJ Facades helping hand systems based on the project requirements.
RJ Facades offer one of the UK's largest range of Helping Hand brackets which have been designed to help achieve the the required U-Value while helping to support the facade system going back to the backing wall.
Project thermal calculations to confirm insulation thickness available on a project by project basis.
RJ Facades design issued by the our technical department can be covered by Product and design insurance if required.
System components available in AutoCAD and PDF downloads.
RJ Facades offer a standard, available ex stock UK, range that covers most design requirements.
All rails available to specific RAL colours in Qualicoat on an order to order basis.
- Components
-
Helping Hand Brackets
Profile & Accessories
Fixings
